Manufacturers of factor-built chimneys offer a unique cathedral ceiling / roof support supplies for chimney installation in a cathedral ceiling. In a cathedral ceiling, both the roof and the ceiling are jointed together. And chimney installation in a cathedral ceiling is the toughest kind of chimney installation which cannot be done alone without following the instruction of factory built chimney manufacturers. The support kit, provided by factory-built chimney manufacturers comprises of a metallic joint that is fixed with a segment of chimney, and regulating platters which are fixed to the roof and to supportive joints. These two, the joint and the platters, are helpful for supporting the chimney below the roof as well as its above.
Things You Need For a Chimney Installation in a Cathedral Ceiling
You need to have a chimney roof support, roof flashing, roof radiation shield and a chimney cap for an efficient chimney installation in a cathedral ceiling. It is better to paint the chimney, which you will be extending into the room, with high temperature paint. If not, you can always cover it with trim sleeves provided by manufacturers. It is essential and must not be neglected because chimney installation in a cathedral ceiling cannot be successfully completed without following these steps. Besides, it will help you in the future and you will not have to deal with numerous minor problems that might occur if such methods are not followed.
A Few Precautions for Chimney Installation in a Cathedral Ceiling
Make sure that the chimney is extended into the room to a certain limit that it allows enough space for the chimney connector allowing it to fulfill the minimum clearance demand from the sloped combustible ceiling. This extension completely depends on the slope of the cathedral ceiling. If the slope of the cathedral ceiling is greater, you will have to further extend the chimney into your room. These are what you basically need to know about the cathedral chimney installation. As it is very complicated and depends entirely on the measurement of chimney and the other components, you need to hire a professional to make accurate measurements and plan your chimney installation in a cathedral ceiling. |
