Chimney installation is a very delicate work where you need perfect measurements, suitable for installing an effective chimney, which plays a vital part in the success of any kind of wood-burning system. Many of the problems occurring in wood-burning appliances are due to inefficient chimney working, or inefficient chimney installation. But you can proceed with a successful chimney installation if you are aware of the entire working process and the types of chimneys that can be used for a chimney installation.
Types of Chimney Installation
Basically, chimney installation comes with Standard Flat Ceiling installation, Cathedral Ceiling installation and Through the Wall installation. These different types of chimney installation use different types of components for their completion. However, some of the components are used in all three kinds of chimney installation because without these components, chimney installation cannot be completed.
Components of Chimney Installation
Each of chimney installation uses flashing and a storm collar which is used at the roofline for water prevention. Oftentimes, water enters through the chimney. But if you use such a sealed storm collar, it will prevent the water from coming in. Furthermore, you can use a chimney cap and extend the height of the chimney’s extending above 5 feet. The advantage of chimney cap during the chimney installation is that it keeps bird, other animals as well as the rain and dirt from coming inside your home. The extended height of the chimney should depend on the surroundings of your rooftop. If there are trees around your house or your environment is occupied, extended height would result in better working of the chimney, ultimately resulting in a successful chimney installation.
Important Pointers for Chimney Installation
While you are busy with chimney installation, you need to keep the following important points in your mind which will help in completing a successful chimney installation:
- Chimney installation can be made more effective by installing the chimney within the house covering. It gives you a lot of benefits as the chimney installation along your outside wall will be vulnerable, facing temperatures, wind and other environmental factors. If it is cold outside and your chimney is open to the chilly winds, the burning process is affected. So, planning an inside chimney installation is always a better decision.
- The ideal height for your chimney, above the roof where it stands, must be at least 1 meter tall. And horizontally, it should be 2 feet, being above any other barrier and buildings. But if your home is located at a certain place where 2 feet are not just enough to avoid any obstacles, you can readjust it according to an ideal height at a particular place. The purpose here is avoiding air turbulence which might fail your entire project of chimney installation.
- Do not use extraordinarily tall chimney in your chimney installation because chimneys taller than 8 meters are found producing an extra flow of air. Here, you need an advice from and expert technician.
This is how the whole process completes. If you find it hard to do exact calculations, and you are troubled with the size and lengths of your chimney, going to a technician would help you. But the most important step that you need to know about chimney installation, where you have to be very careful is the roof. It is the most sensitive step of chimney installation which needs exact calculations and measurements and the success of chimney installation depends highly on roof. |
