Vinyl flooring, because of their quality and durability, is a very reasonable option of special areas of your home that suffer from extreme traffic. With vinyl flooring, you can get rid of several minor and major problems which otherwise are troublesome, making you keep high maintenance for the survival of the flooring.
Moreover, the installation of sheet vinyl flooring is very easy. You don’t need any kind of professional help for installing sheet vinyl flooring. Here is a detailed guideline that will help you in the installation of sheet vinyl flooring.
Preparing the Floor
- Your floor must be prepared for the installation of sheet vinyl flooring before you start with the installation. If not, you should better prepare the floor for the installation of sheet vinyl flooring. By a prepared floor, it means that your floor must be in a proper level; without any bubbles or raised surface spots which result in inefficient installation of sheet vinyl flooring.
- If there are any bubbles or raised spots on the glued subfloor, you can easily get rid of them by walking on the floor in socks. As you walk on the surface, the floor automatically comes into a balance with your weight and bubbles are removed, perfecting the floor for the installation of sheet vinyl flooring.
- If there are any cracks near the base of the wall, fix them with the help of a nail or glue. Otherwise, such issues, which seem extremely minor, make it difficult for you to result in a perfect and stylish installation of sheet vinyl flooring.
- Cracks around the edges of the wall also make it difficult for you to install the vinyl flooring.
- Make sure that there isn’t left any exposed adhesive before you leave the floor for drying. If there is any adhesive left out side on the surface of the floor, it will spoil the look of the floor as well as result in a misbalanced floor level – truly unfavorable for the installation of sheet vinyl flooring.
Cutting the Vinyl to Required Dimensions
- You also need a big space for rolling out the entire sheet vinyl on the floor and helping yourself to cut the sheet vinyl flooring accurately. Therefore, roll out the vinyl flooring and arrange it in such a manner in which it would cover the space of your flooring.
- Make sure that sheet vinyl is faced up when you roll it out.
- Next step is measurement, for which you will have to measure all the dimension of the floor and mark them on the sheet vinyl with a nonpermanent marker.
- You can use a ruler and tape measure for perfect measurements but it is good to leave a few extra inches as you might face troubles when fixing the sheet vinyl in its proper place. If the length is cut down, you will have to buy another sheet vinyl for completing the installation of sheet vinyl flooring. However, the extra length can be trimmed later, depending upon your required length.
- Cut the sheet vinyl into the shape of the floor where you want to install sheet vinyl flooring.
- It is the most delicate step that you will come across during the installation of sheet vinyl flooring; and you need to be very careful while cutting the sheet vinyl according to the exact dimension. Do it calmly; and with the help of a flooring knife and any hand tool which can be used for a straightedge. In this way, the chances for a perfect installation of sheet vinyl flooring will automatically increase.
- Wipe of the markings on the sheet vinyl; roll it back; and take the sheet vinyl to the room where you want to install sheet vinyl flooring.
- Make sure that the back of the vinyl is dirt free when you roll it back.
Get Ready to Glue the Vinyl
- Before taking the sheet vinyl inside the room where you want to install sheet vinyl flooring, clean the thoroughly clean the surface. It is a good idea to sweep it off or use a vacuum.
- After cleaning the entire floor, unroll the sheet vinyl to dry fit it.
- Make sure that the sheet vinyl is perfectly fitted into the floor.
- Trim the extra length of the sheet vinyl if required.
- When the sheet vinyl is perfectly fit into the floor, its time to glue it.
- To glue the sheet vinyl, you will need to roll one side of the floor – rolling it to the center – and spreading the glue on the floor with the help of a notched trowel. You might face some problems while accomplishing this stage as you will have to glue the floor while holding back the rolled sheet vinyl but you can still perform it efficiently. You can easily cross this stage of installing sheet vinyl flooring with the help of a friend.
- To glue the rest of the floor, you will have to repeat this procedure. But the direction of your progress must begin from the center towards the edge of the room.
- You can unroll the sheet vinyl after you have applied glue on the floor. However, it is important to make sure that you place the sheet vinyl very slowly and without creating any bubbles. For this purpose, it is a good idea to press the sheet vinyl towards the floor when you are unrolling it.
- You can use a floor roller in case you witness any bubbles after placing the sheet vinyl on the floor.
- Repeat the same steps to glue as well as to place the sheet vinyl on the rest of the floor.
- After completing all the steps of installation of sheet vinyl flooring, if you notice any spot with exposed adhesives, you should wash it with hot water before you allow it to dry.
- Then, let the surface dry for sometime before you bring it into use. It is better to ask the manufacturers as some adhesives take a more than normal time before they are dry.
This is how you can install sheet vinyl flooring on you own. It does look complicated but a few practical steps would make it very easier for you. You can get help of your friends and you can also hire a professional to help you in the installation of sheet vinyl flooring if you are not able to perform all the above mentioned steps.
|
